Guide2026-11-108 min read

US Passport Photo Requirements: Size, Head, Background

A US passport photo must be 2 × 2 inches (51 × 51 mm), in color, taken in the last 6 months, showing your full face from the front against a plain white or off-white background. Your head, measured from the bottom of the chin to the top of the head, must be between 1 and 1 3/8 inches (25 to 35 mm). You need a neutral expression or a natural smile with both eyes open, and no eyeglasses.

These are the widely published State Department rules, but they can change and individual photos are judged by the agency, not by any website. Always confirm on the official page at travel.state.gov before you print or submit. This guide covers what the photo has to look like, how to make a 2x2 photo from a picture you already have, and why photos get rejected.

The Requirements at a Glance

RequirementUS passport rule
Size2 × 2 inches (51 × 51 mm)
Head size1 to 1 3/8 inches (25 to 35 mm), chin to top of head
ColorColor photo, not black and white
Age of photoTaken in the last 6 months
BackgroundPlain white or off-white, no shadows or patterns
ViewFull face, looking straight at the camera
ExpressionNeutral, or a natural smile; both eyes open
GlassesNot allowed
EditingNo filters, retouching or software changes to your appearance
PaperPrinted on matte or glossy photo paper

If you apply for a US visa, the photo is also 2 × 2 inches with the same head size range, but visa applications often require a digital upload with a pixel size limit, so check the instructions for the exact document you are applying for.

Size: What 2x2 Means in Pixels

A 2 × 2 inch print is square. At 300 pixels per inch, the usual print resolution for photo labs, that is 600 × 600 pixels. A photo with fewer pixels than that can look soft when printed, and one with far more simply makes a larger file. Online passport applications have their own pixel and file size limits for uploads, so read the instructions on the application you use.

If you are not sure how pixels and print size relate, how to change the DPI of an image explains it with a worked example.

Head Size and Position

The head measurement is where most self-made photos fail. The State Department measures from the bottom of your chin to the top of your head, and that has to be between 1 and 1 3/8 inches, which is between half and about 70 percent of the photo's height. In practice:

  • Your face should fill most of the square, with a small gap above your hair.
  • Your whole face, from hairline to chin, must be visible and not covered by hair.
  • Your shoulders should be visible below the chin, so do not crop too tight.
  • Your head should be centered side to side and not tilted.

The department's visa photo template also gives a guide for eye height, roughly 1 1/8 to 1 3/8 inches from the bottom edge. The Passport Photo Maker uses it for its on-screen guide lines.

Background, Lighting and Expression

  • Background: plain white or off-white, with no shadow behind you, no pattern, and nothing else in frame. Stand about half a meter in front of the wall so your own shadow does not land on it.
  • Lighting: even light on both sides of your face. Hard shadows on the face or behind the head are a common reason for rejection.
  • Expression: neutral or a natural smile. Mouth closed is the safest choice. Both eyes open and visible.
  • Glasses: you cannot wear them in a US passport photo. Remove them even if you wear them every day.
  • Headwear and accessories: hats and head coverings are not allowed unless worn daily for a religious or medical reason, in which case you need a signed statement. Wireless headphones and similar devices are not allowed either.
  • Clothing: everyday clothes. Uniforms are not allowed, and a white shirt on a white wall makes your shoulders vanish, so pick a contrasting color.

Edits Are Not Allowed

The State Department says photos must not be digitally changed, including with filters and apps that alter how you look. Replacing or whitening the background with software is the gray area that catches people out. Because of that, the Passport Photo Maker preset for the United States starts with the Original background setting: it only crops and resizes your photo and leaves the background as you took it. The right approach is to photograph yourself against a plain white wall instead of editing the background afterward.

How to Make a 2x2 Photo from a Picture You Already Have

If you already have a good, recent photo against a plain light background, you only need to crop it to the correct size and head position.

  1. Open Passport Photo Maker and choose the United States size (2 × 2 in).
  2. Add your photo. The tool finds your face and centers the frame on it.
  3. Drag and zoom the frame until your head sits inside the guide lines for head size and eye height.
  4. Keep the background on Original, since the US rejects altered photos.
  5. Download the single photo as a JPG, or make a print sheet on 10 × 15 cm, 4 × 6 in, A4 or Letter paper with several copies and cut lines.

The tool runs in your browser, so your photo is not uploaded, and it makes the file at 300 DPI. It only sizes and frames the photo. It does not check your expression, glasses, lighting, shadows or how recent the photo is, so do those checks yourself against the list above.

To make a 2x2 photo without the tool, crop the image to a square in any photo editor, then resize it to 600 × 600 pixels. The Resize Image tool can do the resize, and how to resize an image covers the steps. Keep in mind that a manual crop does not guide you on head size, which is why a template is easier.

Printing the Photo

  • At a store or kiosk: choose a 4 × 6 inch print of the sheet, with no borders or cropping, then cut along the lines. Many pharmacies and big-box stores also take passport photos for a fee.
  • At home: print the sheet on photo paper at 100 percent (actual size), not "fit to page." Measure the finished photo with a ruler to make sure it is exactly 2 inches square.

For lighting, camera distance and other practical tips, see how to take a passport photo at home. If you need sizes for other countries, see passport photo size by country.

Common Reasons for Rejection

  1. The head is too large or too small for the frame.
  2. Shadows on the face or the wall.
  3. The background is not plain white or off-white.
  4. Glasses, glare, or a hat.
  5. The photo is blurry, low resolution or pixelated.
  6. The expression is not neutral, or the face is tilted.
  7. The photo looks edited or filtered.
  8. It was not taken in the last 6 months.

Frequently Asked Questions

What size is a US passport photo?

2 × 2 inches (51 × 51 mm), square. At 300 DPI that is 600 × 600 pixels. The head, from chin to top, must measure 1 to 1 3/8 inches (25 to 35 mm).

Can I smile in a US passport photo?

Yes, a natural smile is allowed as long as you look straight at the camera with both eyes open. A neutral expression with your mouth closed is the safest choice.

Can I wear glasses in a US passport photo?

No. The State Department does not accept eyeglasses in passport photos. Take them off before the photo is taken.

Can I take my own passport photo?

Yes, if it meets all the rules for size, background, lighting and recency. Use a plain light wall and even light, and do not edit it. Check the official requirements at travel.state.gov before you print.

How recent does a US passport photo have to be?

It must have been taken within the last 6 months and must look like you now. Do not reuse an old photo, even if it is the correct size.

Ready to organize your files?

Try AI renaming right away. No sign-up needed until you download.

Try It Free