How to Extract Audio from a Video (MP4 to MP3)
To extract audio from a video, drop the file into a converter, choose MP3 (or M4A), and download the audio track. The free Video to MP3 tool does this in your browser, so the video is never uploaded. It can trim a section, set 128, 192 or 320 kbps, and convert up to 20 videos at once. If you only need an MP4 converted, the MP4 to MP3 page is the same tool under that name.
Extracting audio means copying or re-encoding the sound out of the video container. You keep the audio and drop the picture, so the output is far smaller than the video.
How to Convert MP4 to MP3 in Your Browser
- Open Video to MP3 and drop in one or more local videos. The picker accepts MP4, MOV, WebM and MKV, among others; conversion also depends on the audio codec inside the file and your browser's support.
- Pick the format: MP3 or M4A (AAC).
- Pick the quality. For MP3 the choices are 128, 192 and 320 kbps. For M4A you can choose Original, which copies the audio untouched when it is already AAC, or 128, 192 or 256 kbps.
- To keep only part of the video, enter a start and end time. You can also use the video preview and click the button to take the current playback time. Trimming is available when you add a single video.
- Click convert, then download the file, or a ZIP if you converted several videos.
Media processing runs locally in your browser, with an additional MP3 encoder loaded when needed, so the video is not uploaded for conversion. The tool handles up to 20 videos in a queue, processing them one at a time. If a video has no audio track, it reports that instead of producing an empty file. This is a local-file converter, not a downloader: save an authorized copy of a video first rather than pasting a streaming URL.
MP3 or M4A?
| Format | Choose it when | Notes |
|---|---|---|
| MP3 | You need it to play on any device, car stereo or old player | Always re-encoded, so slight quality loss |
| M4A (Original) | The video already has AAC audio, as most phone and YouTube-style MP4s do | Copied without re-encoding, so no quality loss and a very fast result |
| M4A (128–256 kbps) | You want AAC but at a specific bitrate | Re-encoded |
Choose M4A with Original explicitly if you want to preserve existing AAC audio: switching the format alone can leave the bitrate at 192 kbps. If the source is not AAC, Original falls back to re-encoding at 192 kbps and the result is marked as re-encoded. It is not a universal lossless extraction setting. For compatibility, choose MP3; for preservation of a non-AAC source, use a desktop tool and a container that supports its original codec.
How to Extract Audio on Windows
Windows 11 has no built-in audio extractor in its video player. Practical options:
- The browser tool above, which works the same on any system.
- VLC (free): open Media > Convert / Save, add the video, click Convert / Save, choose an audio profile such as Audio - MP3, set a destination file name ending in .mp3, and click Start. VLC's menus can differ slightly between versions.
- ffmpeg, described below, for people who prefer the command line.
How to Extract Audio on Mac
QuickTime Player can save the sound without extra software:
- Open the video in QuickTime Player.
- Choose File > Export As > Audio Only.
- Save the file. It is an M4A.
If you need an MP3 specifically, use the browser tool or VLC. QuickTime has no MP3 option.
How to Extract Audio on iPhone
The Shortcuts app can pull audio out of a video:
- Open Shortcuts and create a new shortcut.
- Add Select Photos (or Get File for videos saved in Files).
- Add Encode Media and set the output to Audio Only. The available options may vary with your iOS version.
- Add Save File or Share so you can keep or send the result.
That produces an M4A. For MP3 on an iPhone, open Video to MP3 in Safari, choose the video from your photo library, and download the result into the Files app.
How to Extract Audio on Android
Android phones vary by manufacturer, and there is no standard built-in extractor. Open Video to MP3 in an up-to-date Chrome browser, choose a locally available video from the file picker, convert and download. The same format and trim controls are available, but codec support and memory differ between devices. Try one short clip before adding a long recording. If conversion fails on either iPhone or Android, move the original to a desktop rather than repeatedly retrying a large batch on the phone.
How to Extract Audio with ffmpeg
FFmpeg is a command-line alternative for Windows, macOS and Linux. After installing it, inspect the input's audio stream information. For an MP4 containing AAC, this copies the first audio track without re-encoding:
ffmpeg -i input.mp4 -map 0:a:0 -vn -c:a copy output.m4aTo make an MP3 at 192 kbps:
ffmpeg -i input.mp4 -map 0:a:0 -vn -c:a libmp3lame -b:a 192k output.mp3The -vn flag drops the video, and -map 0:a:0 selects the first audio stream. Change the final zero to 1 for a second audio stream, such as another language. M4A stream copying is not appropriate for every codec; if FFmpeg rejects the combination, use a compatible container or deliberately re-encode. Quote filenames that contain spaces.
To make a 90-second MP3 starting one minute into a recording, use:
ffmpeg -i input.mp4 -ss 00:01:00 -t 00:01:30 -map 0:a:0 -vn -c:a libmp3lame -b:a 192k excerpt.mp3Here -t is the output duration, not an end timestamp. Listen to both ends of the saved clip before publishing it.
Choosing the Right Settings
- Speech, podcasts and lectures: 128 kbps MP3 is usually enough, and files stay small.
- Music: 192 or 320 kbps MP3, or M4A with Original if the source is AAC.
- Editing later: keep the highest-quality option. Each re-encode loses a bit of quality, so avoid converting repeatedly.
The output can never be better than the audio inside the video. Picking 320 kbps for a low-quality source does not restore detail; it just makes a bigger file.
For a rough size budget, multiply bitrate in kilobits per second by seconds, then divide by 8,000 to estimate megabytes. Ten minutes at 128 kbps is about 9.6 MB; at 192 kbps it is about 14.4 MB, before small container overheads and encoder variation. Trimming silence or unwanted sections can save more space than lowering the bitrate.
The browser tool extracts the primary audio track and does not offer a language-track selector. Re-encoded output uses at most two channels, so do not use it to archive a surround-sound master. It also does not separate speech from background music: those sounds remain mixed if they share the same track.
Troubleshooting
- No audio found. First play the original and confirm it contains sound. A recording made with microphone capture disabled may have no audio to recover. An unsupported audio codec is a different failure: try VLC or FFmpeg if the original plays elsewhere but the browser cannot decode it.
- The audio is the wrong length. Check that you left the start and end boxes empty or set them correctly. The tool warns you if the range is invalid.
- Very large file. The input limit is 4 GiB per file (shown as 4 GB in the interface), not a guarantee of success on every device. Output is held in memory until saved. Reduce the batch size, extract a shorter section, or use desktop FFmpeg for long recordings.
- M4A encoding fails. Re-encoding requires an available AAC encoder. Try MP3, or M4A Original if the source already contains AAC. An AAC copy can work without decoding and re-encoding the sound.
- The MP3 sounds worse than the video. MP3 is lossy and is re-encoded. Use M4A with Original, or raise the bitrate to 320 kbps.
- The file will not play on an old device. Choose MP3 rather than M4A.
A Note on Copyright
Extract audio only from videos you own, made yourself or have permission to use. Ripping audio from copyrighted material can break the terms of the service that hosts it and the law in your country.
Name the Files Well
Extracted files keep the original base filename, so VID_20261110.mp4 becomes VID_20261110.mp3. Rename the saved result to describe the recording; see video file naming conventions. Before deleting any source, open the download, confirm its duration, and listen near the start and end. Keep the video if you may need another language track, a different excerpt or a higher-quality export later. Compressing the video first is usually unnecessary for extraction and can needlessly re-encode its audio.
Frequently Asked Questions
How do I extract audio from a video for free?
Use the free Video to MP3 tool in your browser: drop in the video, choose MP3 or M4A, and download the audio. VLC, QuickTime on a Mac and ffmpeg are free offline alternatives.
How do I convert MP4 to MP3?
Open the MP4 to MP3 tool, add the file, keep the format on MP3, choose 128, 192 or 320 kbps and convert. The browser does the work, so the file stays on your device.
Does extracting audio reduce quality?
Converting to MP3 re-encodes the sound, so there is a small loss. If the video already has AAC audio, choosing M4A with the Original option copies it directly with no loss at all.
Can I extract just part of the audio?
Yes. Load just one video, then set a start and end time before converting. Leave both empty for the full recording. Adding more files switches to batch conversion rather than applying that excerpt to every video. With FFmpeg, use -ss for the start and -t for the desired duration.
Is it legal to extract audio from a video?
It is fine for your own recordings and content you have the right to use. For other people's material, check the copyright and the terms of the site or service, because personal use is not always permitted.
Free tools
Related Posts
How to Make a GIF from a Video (Free, No Upload)
How to make a GIF from a video in your browser: pick a clip up to 30 seconds, set width and frame rate, then download. Also covers Mac, Windows and ffmpeg.
TutorialHow to Split a PDF and Extract Pages on Mac, Windows and iPhone
How to split a PDF into separate files and how to extract pages from a PDF on Mac, Windows, iPhone and Chromebook, with page ranges and a free no-upload tool.
TutorialHow to Convert WebP to JPG (and Open WebP Files)
How to convert WebP to JPG on Windows and Mac, how to open WebP files, why browsers keep saving images as WebP, and how to convert a batch without uploading.
Ready to organize your files?
Try AI renaming right away. No sign-up needed until you download.
Try It Free